- #RSS ... T-Jet Ribbed
Standards
- Looks stock, but slightly wider and lower. A .385"OD (mounted) tire versus the stock Aurora rubber at .405"od.
For standard T-Jet wheels (front or rear) and will fit many other vintage HO car wheels
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
- #RST ... T-Jet Ribbed *Thins*
- Same as Standards, but thinner for use inside those fenders like on MEV Original cars.
These are also great for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels. A .385"OD (mounted) tire that is .075" thick.
For standard T-Jet and many other vintage HO car wheels
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
-
- #RSL ... Ribbed Lo-Profile
- A .350" diameter (mounted) Ribbed tire for stock T-Jet wheels. The stock tire in on the left, the new Lo-Profile tire is on the right.
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
- #RSLT ... T-Jet Ribbed *Lo-Profile Thin*
- Primarily designed for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels.
A .350"OD (mounted) tire that is only .075" thick.
For standard T-Jet and many other vintage HO car wheels
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
- #TSSB ... Tyco S Small
- #TSLB ... Tyco S Large Blackwall
- #TSLW ... Tyco S Large Whitewall ($2.50 per pair)
- A silicone clone of the original 2 types of Tyco S tires.
Small and Large sizes in blackwall, Large is also available in whitewall style.
The larger of these tires also fits the Aurora hot rod and truck wheels! Imagine your hot rod with these whitewalls.
- BLACKWALLS are $.90 per pair ...or... 50+ pairs @ $.50 per pair
--------------------------------------------------------
- #LNL ... LIONEL Standard
- A silicone clone of the original Lionel tire. Made slightly thicker to fit the wheel better.
For front and rear of Lionel cars. This tire also fits Estrella and early Marx HO cars.
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
-
- #BR ... BAUER silicone tires (AFX Front also!)
- A wide, lo-profile tire designed for those cool Bauer wheels (Bauer tire on the right in photo). Lo-Profile to get the
overall dimension in the same range as the Ribbed Standard tire (on the left in photo). These also work very well on the
front wheels of AFX and JL X-Traction cars.
- $.90 per pair ......or...... 50+ pairs @ $.50 per pair
--------------------------------------------------------
-
- #RSW ... Ribbed Standard White Sidewall
- The same quality Ribbed Standard tire, but with a classic wide white sidewall.
- $4.00 per set of 4 tires
--------------------------------------------------------
-
- #JLW ... Johnny Lightning White Sidewall "SET"
- A complete set of 4 tires for Johnny Lightning T-Jet cars or for Aurora Tuff-Ones.
Two high quality Ribbed Standard Whitewalls for the front wheels and two wide Tuff-Ones Whitewalls for the rear.
- $5.00 per set of 4 tires
--------------------------------------------------------
-
- #HRLW ... Hot Rod Lo-Profile Whitewalls
- A low profile .450"OD (mounted) tire for Hot
Rod wheels. Low for mounting with front axle in "long" position.
- $2.50 per pair
-
- #HRWW ... Hot Rod Washer Whitewalls
- Stock Aurora "washer" size hot rod slicks, with whitewalls
- $2.50 per pair
-
- #HRWWW ... Hot Rod Washer "WIDE" Whitewalls
- A wider, radiused edge version of the hot rod "washer" slick, same price.
- $2.50 per pair
--------------------------------------------------------
-
- #HRLB ... Hot Rod Lo-Pros (blackwalls)
- A low profile .450"OD (mounted) tire for Hot
Rod, Indycar and Truck type wheels. Also available are #HRWB (Washer) and #HRWWB (Wide Washer) tires in blackwall.
- $1.10 per pair ......or...... 50+ pairs @ $.65 per pair
--------------------------------------------------------
-
- #TO ... Tuff-Ones
- Clone of original vinatge Tuff-Ones silicone tires.
The mounted OD is between .385 and .430" depending on the wheels used. This tire is made especially for the wider
rear Tuff-Ones and Johnny Lightning T-Jet wheels. Shown mounted on "Model Motoring Inc" aluminum wheels.
- $1.10 per pair ......or...... 50+ pairs @ $.65 per pair
--------------------------------------------------------
-
- #AFXS ... A/FX Standards
- General purpose .475"OD (mounted) tire for A/FX (1st
Generation and Magna-Traction) rear wheels.
- $1.10 per pair ......or...... 50+ pairs @ $.65 per pair
--------------------------------------------------------
-
- #AFXBU ... A/FX Butt-Uglies
- Low profile .440"OD (mounted) tire for A/FX (1st
Generation and Magna-Traction) rear wheels.
- $1.10 per pair ......or...... 50+ pairs @ $.65 per pair
--------------------------------------------------------
RSL offers a generic tire molded to fit several vintage wheel types.
The tire is 7/8" in diameter, about 3/16" wide and is a silicone clone of a 60's Dynamic Firestone tire.
Excellent traction for this vintage Strombecker, Eldon, Monogram, Revell, Aurora, etc cars.
--------------------------------------------------------
-
- #STROM
- For the small ridged STROMBECKER wheels.
Those wheels were manufactured in smooth aluminum (shown), plastic 5-spoke, and plastic wire types.
That wheel is the "ridged" one found on most Strombecker homeset cars from about 1965 on.
- $4.00 per pair
.
-
- #MONO
- A generic tire which fits many 3/16"-1/4" wide vintage flanged aluminum wheels.
Molded for Monogram wheels, these also fit similar wheels from Revell, Aurora, Dubro, Dynamic, etc. Tire is 7/8" outside diameter.
- $4.00 per pair
.
-
- #ELDON
- Molded for the small ELDON homeset car wheel. Those wheels were plastic,
about 1/2" in diameter, with a non-ridged rimmed.
- $4.00 per pair
-
- #DRIV6 ... Resin Drivers
- Six reproduction "Auto World" heads (cast in front and rear halves), two Aurora T-Jet torsos and two Aurora AFX torsos. Inexpensive drivers for those empty PM cockpits!
- $3.00 per set
.
-
- #DRIVT ... T-JET one-piece Resin Drivers
- Resin reproduction of an early Aurora T-Jet driver figure. Cast in tan resin as one-piece.
Perfect for rebuilding an original car or populating a PM or MM Inc cockpit.
- $1.00 each...or...$10.00 per dozen (12 drivers)
.
-
- #MINT ... Mercedes SL190 Interior, Boot, & Driver
- Bucket seat interior plate for the Lionel Mercedes SL190.
Finally, fill that hole in those old Lionel Mercedes cars that are inexpensive but never seem to have a roof piece!
Reproduction Aurora driver figure is cast as one complete separate piece.
- $3.00 per set
.
-
- #WINT ... Willys Interior, Boot, & Driver
- Bench seat interior plate for a Willys Business Coupe. Fits the Aurora, MM Inc, and PM Willys bodies.
It's ideal for chopping the Willys Coupe top to make a hot rod convertible. Reproduction Aurora driver figure is cast as one complete separate piece.
The car in the photo is an excellent conversion done by Tim Vassa using a flamed Willys and a Rocket Science Ltd resin kit.
- $3.00 per set
.
-
- #CINT ... '55 Chevy Interior, Boot, & Driver
- Bench seat interior plate for the MM Inc '55 Chevy. Great for adding interior detail to your '55.
It's also ideal for chopping the Chevy to make a convertible. Reproduction Aurora driver figure is cast as one complete separate piece.
- $3.00 per set
Add $2.50 per order shipping in the lower 48 states.
To place an order or get more information, email Weird Jack in the Basement Lab!
